Unboxing Inspection

• The product currently uses a drawer color box + ordinary carton packaging, with air column cushions surrounding all six sides for added protection.

• Product List

  • Tracker x 15

    Each tracker has a label at the bottom, with corresponding numerical codes and body parts drawn on it. For example, No. 1 is the left upper leg, and No. 3 is the left lower leg. The positions of the trackers are fixed unless you use the replacement function.

  • Receiver x 1
  • Charging Dock x 1

    Can be used for storage, does not include a battery

    [danger] Using a power adapter above 12V (such as a 24V power adapter) will cause the charging board to burn out due to overvoltage!!!

  • Power Adapter x 1

    12V 2A, wide voltage, compatible with 110V and 220V

  • Straps x 15 + Storage Mesh Bag x 1

    1. 100cm * 2
    2. 60cm * 3
    3. 40cm * 6
    4. 25cm * 4

  • Drawer Color Box x 1
  • [Gift] 15 Body Part Stickers x 1

    This helps to check the position of each tracker after wearing them, making it easier to verify if they are worn incorrectly.

  • [Gift] Plastic Tape Measure x 1
  • [Optional Extra] Quick Release x 15

    In mainland China, this is an optional accessory (i.e., purchased from the official Taobao store). For non-mainland China regions (currently only available through AliExpress), due to the long delivery distance, to prevent some users from not understanding the function of the quick release or forgetting to purchase it, resulting in additional shipping costs for a second purchase, it will be sold as a mandatory accessory along with the main product.

• Product Unboxing Video

  For instructions on how to open the charging box lid, please refer to the 13th second of the video. Use your thumb to press the top end of the box spring button, and use the other hand to open the lid.

• About Hardware Quality
  1. There is a certain gap between the upper and lower covers of the tracker, and there is a slight misalignment between the upper and lower covers, which is normal.
  2. In the large charging box, the injection molding water outlet of the middle support part is left on the appearance surface, causing a certain gap and defect next to the buckle.
  3. The USB interface part of the receiver is slightly tilted from the factory, which does not affect any usage.
  4. The plastic shell has not undergone UV electroplating, making it prone to scratches.
  5. There is a certain capacity error between different tracker batteries, which is normal. The usage time is the standard [the battery percentage can only be used as a reference and not as an evaluation indicator].

Button Instructions

• Button on the Tracker

  Only has power on or restart functions. Single click or long press will only trigger the tracker to power on or restart.
  
  
  
  

• Charging Dock Button

  This button is only effective when the tracker is placed in the charging dock and the three contacts at the bottom of the tracker are in contact with the charging dock.

  

  1. Press once to light up the tracker
  2. Long press for 3~4 seconds to power off
  3. Reset frequency [generally not needed]
     • After lighting up the tracker, long press for 8~10 seconds and release, the blue light on the tracker will flash, entering the reset state. Long press again for 8~10 seconds and release to confirm the reset, the green light will flash.

Charging and Usage Time Instructions

• Upon first receiving the product, confirm whether it can be charged. Normally, after plugging in the adapter, all trackers will light up red and turn green when fully charged.

• If no lights are on, check if the tracker has become loose during transportation and reinsert the corresponding tracker. If none of the lights are on, check if the power adapter is powered.
• Normally, it takes about 2 hours to fully charge, and the usage time is about 30 hours.

  [info] Usage Time and Charging Instructions

  1. Usage time is related to the ambient temperature; low temperatures will reduce usage time.
  2. If individual nodes do not shut down properly, the battery will continue to drain, causing a significant difference in usage time compared to other trackers.
  3. After fully charging, removing and reinserting the tracker will show a red light again, which is normal. This is similar to traditional mobile phones or other electrical appliances where, after being fully charged, removing and recharging can still allow for a short period of trickle charging.

• A very small number of trackers may not turn green after being fully charged. Please refer to the software display for the battery level!

• For long-term storage, it is recommended to discharge and recharge every 2~3 months, otherwise, the battery life will be affected! For example, VR users may have 5~7 idle points, which can be used to replace faulty points in the future. Therefore, it is recommended to maintain the battery properly.

Note: The usage time is not related to the human body's motion state. Once connected, the current consumption remains the same regardless of the speed of movement.

Tracker Status Description

• After the tracker lights up, it enters standby mode. In standby mode, the breathing light continues to flash for 30S. If not connected for 10 minutes, it will automatically shut down.

• As long as the receiver is powered, the tracker will enter the connected state. In the connected state, it will not automatically shut down.

  [warning] Closing the software will not automatically shut down

  In some cases, failure to shut down may also lead to continuous power consumption!

• If the receiver is powered off, the tracker will switch back to standby mode.

• If the tracker does not automatically shut down, it will immediately enter the connected state once the receiver is powered on.